Characteristics Of Scrap After Production Of China Scrap Shredder Machine

After the work of a superior China Scrap Shredder Machine, the scrap will be crushed to the standard, with the following characteristics:

1. Scrap has a higher proportion of heap. After continuous hammering and strong impact in the scrap crusher, the scrap is continuously squeezed and smashed, and stacked in layers until it is discharged out of the crusher. At this time, its material shape is solid and tidy, its own small gap, its natural bulk density can reach 1.2 tons / cubic meter, or even higher.

2, the shape is neat, the specifications are similar. When the scrap is hammered in the scrap crusher, it can only be discharged from the bottom or top grid hole if it is hammered to a certain extent, otherwise it will continue to be hammered until it can be extruded from the bottom or top grid. Since the size of the grid opening used for the discharge of the crusher is determined when the Scrap Crusher is manufactured, the specifications of the material discharged from the same equipment should be similar and the appearance is acquainted.

3. Less attachments. Since the hammer is alternately struck in the striking, it produces a similar tearing effect, and the inclusions in the scrap can easily fall off. Under the action of continuous hammering, the scrap steel collides with steel on the one hand, and on the other hand, slip and scrape between the hammer and the scrap, so that the paint and rust on the surface of the scrap can be easily peeled off. At the same time, in the process of hammering, due to the strong impact energy, the surface of the scrap steel generates a large amount of heat, so that the oil on the scrap steel and the paint will be burnt.