Four Crushing Methods Commonly Used In Scrap Crusher

1. Extrusion crushing: The method of using static pressure to break it is called extrusion crushing. This process belongs to continuous crushing. To be used for the processing of thick-walled recycled metals, the static pressure required for crushing is generated by the hydraulic system of the crusher, and its working capacity depends on the pressure generated by the hydraulic system of the equipment.

2. Fracture crushing: The optional Scrap Crusher special-shaped cutters such as star claws, cutter heads, etc., interact with the cutting edge fixed on the body to make the linear recovery metal to be torn, broken or cut.

3. Blasting type crushing: such crushing buy from Scrap Crushing Machine Supplier must be carried out in special blasting pits, mainly for large steel agglomeration, scrap ingots, scrap ingot molds, four crushing methods, scrap rolls, scrap crusher common machine chassis, flywheel, Explosive disintegration of slag steel, large-scale waste castings, and large military equipment.

4. Cut-type crushing: The high-temperature and high-heat is used to locally melt or oxidize the recovered metal, thereby cutting it. Commonly used methods include oxygen cutting, plasma cutting, etc., in comparison, the cost of oxygen cutting is relatively low, and the application is common.