Use Precautions Of Scrap Shredder Machine

1. Confirm the power supply used by the Scrap Shredder Machine before use, and do not insert the wrong power supply. 

2. When feeding into the scrap packaging chassis, it is necessary to pay attention to uniform and flat feeding, and it is not possible to be high on one side and low on the side, otherwise it will cause the pressure discharge, the piston rod to tilt or even bend and deform.

3. Do not touch the heating pad directly with your hand.

4. Do not rinse the machine with water. When the workplace is wet, the operator should not work barefoot.

5. The hydraulic oil of the hydraulic system should be replaced and filtered once after the first use, and then replaced or filtered every six months to ensure the cleanness of the hydraulic oil and the normal operation of the hydraulic system.

6. When the Scrap Shredder is not in use, remember to unplug the power supply.

7. Do not replace the parts on the machine at will.