Maintenance And Lubrication Of Tin Plate Scrap Metal Shredder

Released on Dec. 06 , 2018

Maintenance and lubrication of the Tin Plate Scrap Metal Shredder: It is best to carry out the maintenance and lubrication of the machine regularly. First, keep the machine dry. Do not let it rain, or put moisture on it.

Provide a reference here:

(1) Remove debris or dirt from the machine once a week

(2) Once a month, the cleaning and maintenance lubrication of the upper skateboard and the middle knife and the front top knife mentioned in the previous section will be done once.

(3) Once every three months in Tin Plate Scrap Metal Shredder Supplier, except for the above two maintenance, add all the lubricants (shaft, heart) and bearings.

(4) Replenish the oil in the gearbox of the reducer every two years.

(5) It should be noted that several parts can not be refueled: a. b all belts. c slide the slide and around.

(6) Do not add too much each time you refuel, so as to prevent the micro switch from malfunctioning due to oil immersion.

Tin Plate Scrap Metal Shredder


Copyright © Xinji Qiansen Metallurgical Machinery Co., Ltd. All Rights Reserved | Sitemap | Powered by