Correct Metal Shredder Machine Feed Port

Many Metal Shredder Manufacturerimport iron chains and rubber to the stalls. This makes it easy for the metal in the crushing chamber to fly out and hurt people. Second, it is difficult to enter the uneven materials.

The Metal Shredder Machine adopts The pressure roller feeds, the roller is equipped with spikes, the tearing is not slipping, the material enters the chute, the nip roller will crush the material, the material is flattened to a thickness of less than 100 mm, and slowly fed into the crushing cavity, under the moving bracket There is a 100-ton hydraulic tensioning cylinder, and extra-thick materials can be jacked up. It will not be damaged, and it also has the function of the flying material. The super large pressure roller will seal the cutting port tightly, and the material of the crushing chamber will not fly out. The rotor disk special steel making super large turntable is formed by forging with tool steel. Casting cast steel material, our turntable's large impact force will not crack and deformation, so the purchase must be checked.