Temperature Influence On Scrap Crusher

Released on Sep. 28 , 2018

The Scrap Crusher is a high-efficiency crushing device that changes its own strength by its own strength and self-stress. Therefore, it is normal for some parts of the crusher to have an instantaneous high temperature state in daily work. For example, the metal crusher is crushing scrap iron scraping lace. When this is the high-speed contact between iron and iron, the temperature will increase extremely rapidly, but when the crushing is completed, it will immediately cool down. This does not affect the continued operation after it. For example, the long-term operation of the plastic crusher will greatly increase the transmission gear. The temperature rises up to 60 degrees, which is normal without panic, because the long-term torque output heat is normal, there is no loss at 60 degrees for the alloy steel transmission size material, then when the temperature is not normal, this is exactly East China should emphasize that in the case of incorrect cutting, abnormal high temperature or even broken parts of the crusher itself will occur. If you buy a 340 metal crusher, your feed rate per roll reaches 450. Doesn't this level cause the overload operation of the metal crusher? If you continue to use it, you will find that the temperature around the metal crusher is instantly increased. Or if the tool turns red, stop it immediately and let China Scrap Shredder ease for one minute. Then, strictly follow the feeding amount of the manual to carry out the production. Otherwise, you will often burn the motor and damage the parts.

Scrap Crusher

*
*
*
*
*

Copyright © Xinji Qiansen Enironmenal Production Technology Co.Ltd All Rights Reserved | Sitemap | Powered by   

Skype
Whatsapp
Email
WeChat
WeChat
Top