Temperature Impact On China Metal Shredder

The China Metal Shredder is a high-efficiency crushing device that changes its own strength by its own strength and its own ability. Therefore, it is normal for some parts of the crusher to have an instantaneous high temperature state in daily work. For example, the metal crusher is crushing the scrap iron and scraping the lace trim. When this is the high-speed contact between iron and iron, the temperature will increase extremely rapidly, but when the crushing is completed, it will immediately cool down. This does not affect the subsequent operation. For example, the long-term operation of the plastic China Scrap Shredder Machine will greatly increase the transmission gear. The temperature rises up to 60 degrees, which is normal without panic, because the long-term torque output heat is normal, there is no loss at 60 degrees for the alloy steel transmission size material, then when the temperature is not normal, this is exactly East China should emphasize that in the case of improper cutting, abnormal high temperature or even broken parts of the crusher itself will appear. If you buy a 340 metal crusher, your feed rate per roll reaches 450. Doesn't this level cause the overload operation of the metal crusher? If you continue to use it, you will find that the temperature around the metal crusher is instantly increased. Or if the tool turns red, stop it immediately and let it ease for one minute. Then, strictly follow the feeding amount of the manual to carry out the production. Otherwise, you will often burn the motor and damage the parts.