Precautions During Scrap Crusher Operation

Released on Jul. 31 , 2018

(1) Check the operation, and there should be no abnormal knocking sound inside the China scrap metal shredder. Special circumstances should be stopped immediately. The ore size is not more than 0.8 times that of the ore supply. The lower part of the discharge chute and the broken cone should not be blocked by the ore. Otherwise, the ore will be lifted by the broken cone and the ore powder will enter the eccentric shaft, causing an accident.

(2) Pay attention to the operation of the oil pump, and check the oil flow indicator, oil temperature and oil pressure indications everywhere. The temperature of the oil after passing through the cooler should not exceed 45.53 ° C, the return oil temperature should not be higher than 60 E, and the oil is supplied to the upper suspension device on time.

(3) Pay attention to check the tightness of the V-belt. Use the thumb to press the V-belt to measure the tension. If the pressure is not more than 1.5m, the tension is suitable. Check for cracks and pay attention to the V-belt.

(4) It should be checked frequently whether the connecting pin between the beam, the middle frame and the base is loose and the gap is 15.5mm along the circumference.

(5) Check the lining of each part for looseness, lack of and severe wear.

(6) Strictly check the ore supply situation and prevent metal objects such as hammers and bits from entering the crushing chamber.

(7) In the event of an accident during operation, it shall be immediately disposed of in accordance with the prescribed procedures.

(8) Whether the scrap crusher running smoothly, and whether the entry and discharge of materials are smooth.

Scrap Crusher


Copyright © Xinji Qiansen Metallurgical Machinery Co., Ltd. All Rights Reserved | Sitemap | Powered by